|
|
|
|
|
|
Mile Hi™ 'MONSTER TOWER PLUS'
|
Our Price: $279.99
|
|
|
'MONSTER' Tower PLUS features a stainless steel 3"-diameter, 40"-tall column with a stainless steel screen gasket for full access.
Same as the 'MONSTER' but with a bigger condensor to accommodate the boilers with faster/higher output.
It comes with a 3" clamp, a digital thermometer and a rubber bung. Can be mounted on a
40-qt stainless steel boiler, on other stainless steel boilers or on a Sankey-type (standard US 8-gallon or 16-gallon)
beer keg WITH USE OF A SPECIAL CONNECTOR or on a drum
WITH USE OF A SPECIAL CONNECTOR. One 3"-diameter screened gasket
is included. See how 'MONSTER'
connects to a keg. See how 'MONSTER'
connects to a drum.
|
|
|
|
|
|
|
|
|
|
MONSTER TOWER
|
|
Our Price: $240.00
|
|
|
'MONSTER' tower features a 3"-diameter, 40"-tall column with a stainless steel screen gasket for full access. It comes with a 3" clamp, a digital thermometer and a rubber bung. Can be mounted on a 40-qt stainless steel boiler, or on other stainless steel boilers or on a Sankey-type (standard US 8-gallon or 16-gallon) beer keg WITH USE OF A SPECIAL CONNECTOR. One 3"-diameter screened gasket is included.
|
|
|
|
|
|
|
|
|
|
41" 2-in-1 Stainless Steel Distiller Tower
|
|
Our Price: $209.99
|
|
|
2"Diameter 41" 2-in-1 Stainless Steel Distiller Tower
|
|
|
|
|
|
|
|
|
|
40" Stainless Steel Distiller Tower
|
|
Our Price: $170.00
|
|
|
40" Stainless Steel Distiller Tower 2"Diameter This distiller tower comes complete with a rubber bung, a quick-release connector, which fits on a standard stainless steel keg, and a digital thermometer. The column is 40 inches tall. Comes with an extra O-ring gasket
|
|
|
|
|
|
|
|
|
|
30" Stainless Steel Distiller Tower
|
|
Our Price: $158.00
|
|
|
30" Stainless Steel Distiller Tower 2"Diameter This distiller tower works great as a reflux and a pot still. If using as a pot still, simply use no packing and only run the water through the condenser. This distiller tower comes complete with a rubber bung, a quick-release connector, which fits on a standard stainless steel keg, and a digital thermometer. The column is 40 inches tall. Comes with an extra O-ring gasket
|
|
|
|
|
|
|
|
|
|
Pot Still Head - Stainless Steel
|
|
Our Price: $109.99
|
|
|
20"Tall 2" diameter This distiller tower comes complete with a quick-release connector, which fits on a standard stainless steel keg or my 26-qt or 32-qt boilers and Milk Cans , a digital thermometer, and a rubber bung.Comes with an extra O-ring gasket (total of TWO).
|
|
|
|
|
|
|
|
|
|
3"Pot Still Head - Stainless Steel
|
|
Our Price: $195.99
|
|
|
24"Tall 3" diameter This distiller tower comes complete with a quick-release connector, which fits on a standard stainless steel keg or my 26-qt or 32-qt boilers and Milk Cans , a digital thermometer, and a rubber bung.Comes with an extra O-ring gasket (total of TWO).3” Diameter tower is reduced to 2” flange at the bottom of the tower. And will fit a standard keg. Test results 11/2 gallon an hour at 70% using racshing rings for tower packing.
|
|
|
|
|
|
|
|
|
|
DIY Ready-to-Mount Copper Tube
|
|
Our Price: $99.95
|
|
|
40"-tall, 2" diameter copper tube with stainless steel ferrule silver-soldered on with a built-in-screen. Comes complete with a clamp and a gasket. It is ready to mount on a standard beer keg or Mile Hi Distilling's many boilers including a milk can boiler with 2" opening.
Now you can build your own still tower and don't have to worry about how to connect the boiler to the tower. I've received many calls from you, wanting to build your own copper tower, but wasn't sure how to connect it to a boiler. I got that part taken care of for you. Now you can spend your precious time on designing and building a tower of your dreams!
Comes with a tri-clamp and a gasket, so it is ready to mount.
|
|
|
|
